Home›Showroom›Model Details
Building on the success of the RCR35 Series, Land Pride is proud to offer the RCF3610 dual-spindle rotary cutter – an updated, flat-top version of the original RCR35. With larger gear boxes, larger cutting capacity, and a deeper deck, the RCF3610 is the ideal dual-spindle cutter for narrow areas in pastures, along roadsides, or in tree groves.
- Features
- Specs
- Options
- Photos
- Promotions
Features
- SURPASSED RUGGED INDUSTRY STANDARDS: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
- PULL-TYPE WITH DUAL LEVELING RODS: Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
- QUICK HITCH ADAPTABLE: 3-Point and semi-mount are Quick Hitch adaptable.
- LAMINATED TIRES: Laminated tires can handle almost any condition and don’t go flat.
- FULL LENGTH SKIDS WITH REPLACEABLE SHOES: Adds reinforcement to side panels. Replaceable shoes allow for change before wearing through to weld-on piece.
- SLIP CLUTCH PROTECTION ON MAIN DRIVELINE: Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact.
General Information
Dimensions
Cutting Height Range
2 - 12 in.
Weight
3-Point Mounted - 2,230 lb.
Semi-Mount - 2,270 lb.
Pull-Type - 2,430 lb.
Length
3-Point Mounted - 122 in.
Semi-Mounted - 122 in.
Pull-Type - 157 in.
Measurements
Blades
Number - 4
Bolts - Keyed with hardened flat washer and lock nut
Blade Tip Speed
17,400 fpm @ 1,000 rpm
Blade Type
Heat treated free swinging suction
Operational
Tractor PTO Speed
1,000 rpm
Hitch
3-Point and Semi-Mount - Category 2 and 3 Quick Hitch adaptable
Pull-Type - With dual self level rods
Wheels
Bearings - Tapered roller bearings in cast iron hub
Driveline Protection
4-plate slip clutch
Drive Motor
Gearbox - 540 rpm driven gearbox, beveled gears
Input Shaft - 1.75 in. 20 spline
Lubrication - 80 - 90W EP gearlube
Oil Capacity - End Boxes - Omni - 5.5 pt.; Corner - 10 pt.; T-box - Corner - 4.5 pt.
Tailwheel
3-Point Without Rear Axle (2 Tires) - 4 x 8 x 15.25 in. Caster laminated
3-Point with Rear Axle (2 Tires) - 4 x 8 x 15.25 in. Caster laminated or 6 x 9 x 21 in. Caster laminated
Semi-Mount (2 Tires_ - 4 x 8 x 15.25 Caster laminated or 6 x 9 x 21 in. Caster laminated
Pull-Type with Single Spindle (2 Tires) - 6 x 9 x 21 in. Laminated or 24 x 7.7 in. recap foam filled aircraft or 29 in. x 16 ply aircraft
Pull-Type with Dual Spindles (4 Tires) - 6 x 9 x 21 in. Laminated or 24 x 7.7 in. recap foam filled aircraft or 29 in. x 16 ply aircraft
Operating Tongue Weight
Pull-Type - 1,087 lb.
Bearings
Tapered roller bearing in cast iron hub
Stump Jumper
2 each, 3/16 in. round pan
Driveline -- Center
3-Point and Semi-Mount - ASAE Cat. 4
Pull-Type - ASE Cat. 4 equal angle shaft or constant velocity U-joint
Tractor Size
Lift-Type - 60 - 130 hp
Pull / Semi - 50 - 130 hp
Gearbox HP Rating
210 hp T-box / 205 hp outboard
Gearbox Protection
Cast iron housing
Other
Warranty
Overall Unit and Driveline
1 Year Parts and LaborGearbox - 5 Years Parts and Labor
Hydraulic Cylinders - 1 Year Parts and Labor